Mountain Buzz banner

Trailer Porn

352740 Views 526 Replies 149 Participants Last post by  MT4Runner
3
And so it begins!

Mine's a custom job. An old bass boat trailer stripped down, rebuilt with angle iron, treated 1x4's in the floor, and boat deck built on top with two 2x10's(not treated and need to replace). New 2500'b axle with 15in tires. No clue on weight, but pulls smoothly at up to 80-85mph. Boat deck is just high enough to slide coolers, dry box, and tubs underneath; but not too tall that I have wind drag on the top. Each deck board has rollers on the back, but they haven't been as useful as I thought.

And yes, those are trucker mudflaps. They help keep the muck out of the gear on the trailer, and prevent the rocks from ricocheting back into the car(shattered a rear window on good ole Trough Rd).

Enjoy.

Attachments

See less See more
  • Like
Reactions: 1
1 - 2 of 527 Posts
8
Here's my trailer I built last fall. My buddy had an old trailer sitting in the weeds and he let me have it if I took it off the property. Built her out so I can haul my motorcycle on the front so I can run a self shuttle
Tire Wheel Vehicle Automotive tire Sky

Cloud Sky Tire Wheel Vehicle


Tire Wheel Vehicle Car Motor vehicle

Wheel Tire Vehicle Car Automotive tire

Cloud Sky Plant Tree Motor vehicle

Sky Wheel Tire Vehicle Wood

Tire Wheel Automotive tire Motor vehicle Vehicle

Attachments

See less See more
  • Like
Reactions: 5
I put the cross bars in because I didn't know if I wanted to make it fully decked later on so I put an extra support so I could convert it really later. As far as the carriage bolts, the hardware store didn't have any when I was building it and I'm lazy so hex bolts haha
1 - 2 of 527 Posts
Top