Mountain Buzz banner

Sew What! DIY Tips and Tricks.

12509 Views 128 Replies 24 Participants Last post by  MT4Runner
Sewing machine Sewing machine feet Table Wood Rectangle

Shoe Light Drinkware Font Coffee cup

Sewing machine Light Table Yellow Sewing

Glasses Scissors Eyewear Hand tool Vision care

Shelf Luggage and bags Interior design Shelving Automotive design

Blue Rectangle Automotive exterior Wood Gas

Other users have shown an interest in having one place to gather our thoughts on each persons best ideas on how to DIY crappy homemade gear. So here we go, contribute your successes and as importantly your failures. Mistakes are a great learning tool.

I'll start. Attached are some photos of my little sewing room. Its in a basement and could use some sprucing up but it's a rental and likely poisoning me with Radon gas so I leave it be.

Organization really helps. We all can stand to be better at it but keep up the good fight.

As much as you can afford to, keep a variety of materials on hand. When the creative urge strikes, you are much more likely to go make something if you have some materials on hand.

I find it most helpful to put away my tools and accessories EVERY time I am leaving the shop for more than a few hours. Nothing better than coming in to a tidy workspace to spark creativity.

When purchasing a machine make a budget and then try and double it. You will never wish you bought less machine, in my experience. I have two pretty heavy duty machines and find myself wanting bigger and badder machines. I am ALWAYS on the lookout. Thanks Pine for the hook!!

When you make something and if think you are really gonna like it, try and write down measurements of the pieces used to construct it. At a minimum make sketches. I try and keep large pieces of cardboard around to make patterns. If I really like something I may go as far as drawing it up in Fusion and cutting out patterns on the plasma so that they can be used to cut out material.

If you have industrial machines, make a little thread catch bin on the end of your table. This helps keep the shop so much cleaner.

I will try and continue adding to this thread as time and creativity permits.
Wood Floor Flooring Gas Table
1 - 1 of 1 Posts
1 - 1 of 1 Posts