Mountain Buzz banner

1 - 8 of 8 Posts

·
Registered
Joined
·
407 Posts
Discussion Starter #1
Hello all,
I have a slow leak in one of the side tubes of my Sevy Sk100 IK. It takes about 6 hrs to flatten completely from full inflation. I cant figure out how to examine such a large surface area to locate the leak. Any advice would be greatly appreciated.
Thank you all v much.
 

·
Registered
Joined
·
115 Posts
Use a high soap to water ratio, way more than you use to wash dishes. It helps the bubbles form and not pop.
I tore up the two person version on muddy Creek in Utah and used PVC tarp and HH-66 to fix it. After you do the repair and roll it well, leave a book on it with heavy weight on top overnight if you are patching the high pressure floor.
 

·
Registered
Joined
·
407 Posts
Discussion Starter #6
re IK leak

Thanks all for the suggestions.
Zach, how do I find if it has a bladder. Nowhere in the literature have I read that it has and there is no zip or any external evidence of this like in AIREs. So how would I get at it if it does?
Thanks again,
Jimmy.
 

·
Registered
Joined
·
76 Posts
Thanks all for the suggestions.
Zach, how do I find if it has a bladder. Nowhere in the literature have I read that it has and there is no zip or any external evidence of this like in AIREs. So how would I get at it if it does?
Thanks again,
Jimmy.
No zipper no bladder.
 
1 - 8 of 8 Posts
Top