Mountain Buzz banner

1 - 7 of 7 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
i recently bought an nrs e-140 and was wondering if the the yeti 160 tundra fits into the center compartment, the specs say the center compartment is 45" wide and the the yeti 160 says it is 45" inches as well, just wondering if its going to rub on the tubes to much?
 

·
Registered
Joined
·
158 Posts
Should be just fine. My Willi 2 has the same 45" distance and a yeti 160 fits just fine. They are tapered and fit perfectly into a large DRE drop bag (44").
 

·
Registered
Joined
·
1,385 Posts
Be sure you are using the right measurement from Yeti- the lid is always wider than the section that will be between your frame tubes.

Sent from my SM-N900V using Mountain Buzz mobile app
 

·
Registered
Joined
·
207 Posts
I have a '94 NRS e 140 and my tubes are 40" in between. That yeti 160 would definitely not fit in my boat w/o pushing the sides. Follow the advice of measuring to be sure.
 

·
Registered
Joined
·
1,385 Posts
Yeah- a 14' boat with 45" between the tubes would be unusual.....my boat is 15' and I've only got 42" to work with.

Sent from my SM-N900V using Mountain Buzz mobile app
 
1 - 7 of 7 Posts
Top