Mountain Buzz banner

14' raft, frame and cooler height

11341 Views 18 Replies 16 Participants Last post by  dirtroady
Building out a gear rig for a 14' RMR and I'm struggling to decide on a cooler.

I am currently looking at these three coolers:

Where I'm struggling is I love the capacity of the RTIC but it is 21" tall. Add 1" suspension above the floor and I'm basically rocking a 22" cooler. The floor to top-of-tube measurement is ~ 11" and I have 1.5" crossbars (1.9" OD). That gives me a little more height with ~13" from top of rail to top of floor. Apply some algebra and I'm looking at ~9" inches (worst case) of cooler above my frame. That's a lot of cooler. The cooler would be in one of the front two bays of a 4 bay frame. Would like for it to be in the front bay.

I looked through as many threads as I could for advice but still didn't come to a great conclusion. Should I give up on my quest for a higher capacity cooler and go with one of the 100 qt sizes, or should I say f*!ckit and get a cooler that I may be unhappy with due to it's height.

I should also say that even though it's smaller, the Prospector definitely has my vote for design...

I've got 42" to work with between the tubes, if anyone has a better cooler recommendation I am all ears.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top