Originally Posted by treemanji
Thanks. I don't like gear rubbing the floor for 18 days this fall. Probably still make a beaver board out of some 3/4" or 1/2" ply or sheet foam.
I ran this bag for probably over 40 days on the water and haven't had an issue with any rubbing (especially compared to the aluminum and metal all over the boat).
What I did do, was cut a piece of closed cell foam to line the bottom part of the bag and protect the mesh (and the floor) from anything that might want to rub against it that's in the bag.
I run a Large on my Aire 156 and I kind of wish I could have a medium floor and large for the rest of it. Where I run my frame I wind up with a bit too much floor and rigging it so it is truly suspended from the tubes and frame becomes more difficult because of this.